Testing picture... Mustang Pedal Car.
1 - 3 of 3 Posts
you better start saving he's going to Trade those pedels in for the real thing before you know it....
So what Mods has he done to his sweet lookin' pony???
AKA "Fastbackpimp"
http://hometown.aol.com//dasbus73/Index.html
[color:blue]VMF Member Since Nov. 99</font color=blue>
http://albums.photopoint.com/j/View?u=1590185&a=12106882&p=43855504.jpg
So what Mods has he done to his sweet lookin' pony???
AKA "Fastbackpimp"
http://hometown.aol.com//dasbus73/Index.html
[color:blue]VMF Member Since Nov. 99</font color=blue>
http://albums.photopoint.com/j/View?u=1590185&a=12106882&p=43855504.jpg
Joined
·
2,242 Posts
Very cute, What a lucky boy!
[color
urple]JOYCE E.</font color=purple>
See Bio
MCA#40248
http://hometown.aol.com/epperstang/mustangs.html
Northern Utah Mustang Owners Association
http://www.numoa.com
[color
urple]JOYCE E.</font color=purple>See Bio
MCA#40248
http://hometown.aol.com/epperstang/mustangs.html
Northern Utah Mustang Owners Association
http://www.numoa.com
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
4 lug Scarebird disc brakes
Vintage Mustang ForumHell, Just wondering if anyone on this site uses or have used Scarebird disc brake conversion on their 6 cylinder Mustang. I am thinking of doing this, but have questions about if the stock 14 inch steel wheels will clear the calipers. The Scarebird site states if the offset is more than 3...- 20
- 276
-
A/C Console Hardware
Vintage Mustang ForumI have bought and redone an original A/C console for my '66 coupe. I have the 6 screws that mount the plastic base. I need the 2 screws for the end cap and 1 for the shifter plate. I bought a pack of #8 3/8" screws and currently using one for the shifter plate. Different head but works. I have...- 2
- 76
-
Subframe connector installation question
Vintage Mustang ForumI’m going to get them welded on but have a bolt-on kit I’m installing right now. The rear is supposed to attach via a threaded hole on the rear subframe. Due to being 50 years old I assume, the holes don’t align between the connector and subframe. The subframe hole is shifted about 1/2” towards...- 9
- 324
-
Brake booster question, which one?
Vintage Mustang ForumI was going to stay manual brakes but since my engine is out and I am adding borgeson steering I've decided to go with power brakes. Up front I have Wilwood discs and on the rear I have 2003 Cobra disc brakes mounted to Mustang Steve brackets. I also have a Wilwood adjustable proportioning...- 1
- 64
-
mikec35 · updated
-
Too hot to work on the Mustang, so I improvised.
Vintage Mustang ForumIt’s about 100 degrees here in sunny North Texas. Feels even hotter. We’ve got too much to do on my daughter’s car, so it’s time to get creative. I would have gotten a single larger unit, but my in-laws had these two 5,000btu units new in the box, so I’m giving them a test drive. After an hour...- 27
- 488
-
BlakeTX · updated
Join now to ask and comment!