The imprinted Pony vinyl material? I have a couple of head rest that I will be recovering to match my interior color, and thought it would be neat to have a pony on the front of each headrest. I would consider sending them off to a shop, if I knew they would be done with the correct grain & color to match the rest of my interior. Does TMI do this kind of stuff?
TFOB and Others! Where can I find....
1 - 2 of 2 Posts
Joined
·
2,987 Posts
Hey Doug, SWMBO Made Mine and sewed them on to the back of the seats. She used a red Vinyl with sparkliies in it. She just made a template out of a running Mustang Pony she found on the internet and low and behold a Pony for the seat!
Let me know if you want more detailed instructions.
Let me know if you want more detailed instructions.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Are our brake lights not very good by today's standards?
Vintage Mustang ForumMy 69 just has the regular rear light units with one bulb in each. My wiring is very slightly modified to not have them flash as indicators and they just work as night lights and brake lights. I have often wondered about how good the rear brake lights are during the day, especially on a very...- 91
- 2K
-
Quick(ish) steering question
Vintage Mustang ForumI went out and looked to see exactly what steering box I have and as suspected, its the HCC AT box. So, now I'm faced with a decision. Do I send this box to Chock to rebuild and add a roller Shelby quick steer kit to it OR do I need to find a 16:1 box and put the quick steer kit on it? I'm...- 0
- 0
-
Russstang · updated
-
Hooker Long tube bolts hard to torque down Any tricks?
Vintage Mustang ForumGuys, 302 in a 68 fastback with trick flow heads. I've had to tighten down the header bolts 2 times already and I can't get a socket around some of them because they are too close to the pipes. Any tricks or special wrenches that I can get?- 10
- 134
-
Traction Bar
Vintage Mustang ForumHowdy. My car had traction bars that the previous owner installed. I don’t plan on drag racing or taking off hard, so apart from what a traction bar is supposed to do, am I giving anything up by removing them? 1967 Coupe | 351 4 speed MT- 9
- 93
-
1967 Door Speaker Grilles
Vintage Mustang ForumDoes anyone have any advice for telling a set of 1967 door speaker grilles from the Scott Drake knockoffs other than assumptions of their age based on their condition? Are their materials different? I've never seen a set in person off of a car. Thanks- 3
- 91
Join now to ask and comment!