Thanks Doug; this is Way Cool!
Join the discussion
Recommended Reading
-
Turn signal woes
Vintage Mustang ForumI've been trying to figure out why my turn signals on the 68 coupe (302, T5, fixed column) won't work. The brakes, emergency flashers and front parking lights all work. But none of the turn signals do. I installed a sequential LED taillight kit (replaced the relay with this kit, turn signals...- 11
- 190
-
Too much sealant on front windshield and rear glass install on 66 coupe, now trim wont clip
Vintage Mustang ForumI took my time to read through the nightmares of front and rear window trim. Watched both the CJ Pony Parts and MTF glass installation videos. A buddy and myself tackled the window install and seemed to go really well. Made sure all my clips were bent a little extra to allow the trim to clip in...- 1
- 19
-
cturboaddict · updated
-
Replacement Pins for Connectors
Vintage Mustang ForumI've looked, but failed. I'm trying to find replacement pins, both male and female, for the instrument cluster connectors. Can anyone point me in the right direction? Thanks.- 2
- 20
-
CJM68GT390 · updated
-
Why Is 1968 the Bastard Year?
Vintage Mustang ForumWhat is it about '68's? Heaven knows the music was outstanding, but finding '68 parts seems to be a challenge. Current problem is trying to find floor console parts. '67 stuff is reproduced all over the place now, but pretty much skip right over '68. I mean, they only made a 3rd of a million...- 10
- 227
-
Dying a Steering Wheel
Vintage Mustang ForumI need my steering wheel to be black but I have a red steering wheel. Has anyone ever tried to dye a steering wheel? If so what did you use and what preparation did you do before dying? Did the dye work or did it rub off since there is some much friction by your hands on the steering wheel. Thanks- 4
- 83
Join now to ask and comment!