Joined
·
5,527 Posts
What is it? Saw it on a carb ad.
Coppertone's current condition:
http://www.knology.net/~dorner/images/doorsonright.jpg
Coppertone's current condition:
http://www.knology.net/~dorner/images/doorsonright.jpg
Thermactor?
1 - 4 of 4 Posts
G
Guest
·Guest
Joined
·
0 Posts
Its for emissions. Beginning in 66 ford used them in california cars. They had special heads and the system also used an air pump, hoses and air monifolds. Alot of people have the bumps in the heads grinded out when they run these types of heads IIRC
~Chris
San Antonio, Tx
66 coupe 289
70 fastback done by may/graduation...hopefully
~Chris
San Antonio, Tx
66 coupe 289
70 fastback done by may/graduation...hopefully
G
Guest
·Guest
Joined
·
0 Posts
Drove me nuts for a minute there...
G
Guest
·Guest
Joined
·
0 Posts
yeah, its not really talked about that often so its not something you hear about everday.
~Chris
San Antonio, Tx
66 coupe 289
70 fastback done by may/graduation...hopefully
~Chris
San Antonio, Tx
66 coupe 289
70 fastback done by may/graduation...hopefully
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Restoration steps in the correct order with a limited budget?
Vintage Mustang ForumSo my project is starting to slow down, mainly because of budget issues and so many conflicting answers floating about the interwebs and shops I call for help. The elements I need to do now are related and seem to have to happen quickly in relation to one another. To top it all off, they aren't...- 25
- 374
-
Acoustic · updated
-
Does anyone know how to align the truck deck lid?
Vintage Mustang Forumit’s aftermarket. I looked at how to align it so there is no gap but I couldn’t figure out how. Pic for attention.- 0
- 0
-
derek2079 · updated
-
Will these 67 mirrors fit my 65?
Vintage Mustang ForumI have these standard round mirrors now on my 65 FB in the stock location on both sides. They are too small and i've put up with these long enough. (n) 65 Round Mirrors I see that 67s had a rectangular mirror as shown in the following link. They are 5.5 x 3 inches. Without being home at the...- 9
- 218
-
blkfrd · updated
-
Masonite seat backs
Vintage Mustang ForumIs it possible to get just the Masonite seat backs without the upholstery?- 5
- 188
-
arbys · updated
-
Show me your engine bay!!
Vintage Mustang ForumSince my car is in pieces and I’m going to rebuild the 289, I need to get some ideas on how to “dress” the engine bay. I don’t want to end up with an abomination of blue, red, yellow, black and chrome - so pop your hoods! I’ll get it started ;)- 62
- 1K
-
67_ksb · updated
Join now to ask and comment!