Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,158 Posts
Discussion Starter #1
I'm taking my oil pump apart as I cean it. I notice there was some thread sealant on the 4 bolts that hold the cover plate. What kind if thread sealant should I use? Should I use any thread sealant? I have red and blue locktite, but is there something specific to use on bolts bathed in oil?
 

·
Registered
Joined
·
1,108 Posts
I used Loctite blue on the oil pump to block and pickup to pump, but nothing on the cover plate. Just torqued to spec. Some blue loctite could not hurt...
 

·
Registered
Joined
·
2,154 Posts
Blue Loctite and drilled the heads for safety wire.
 
1 - 5 of 5 Posts
Top