Vintage Mustang Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4,267 Posts
The flexplate will only bolt to the crankshaft one way . Otherwise the bolt holes will not line up . When installing the converter make sure to put in some fresh fluid . Then install the converter and slowly turn several times until the converter and the input shaft are fully seated . I believe that the converter will engage/pop twice when turning .
 

·
Registered
Joined
·
4,267 Posts
Thanks , forgot to mention aligning the bolt/plug .
 
1 - 2 of 2 Posts
Top