Vintage Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
952 Posts
Discussion Starter #1
Installing the new radiator today and I need to know what size the rubber line is from the tranny line to the radiator connections. I have an aftermarket tranny cooler but the lines are all bloated and such. I believe they are regular fuel lines of 3/8". Any other suggestions? I was thinking clear would be a cool addition!

Ohh and I can't find a gano brass filter anywhere around here. Does the panty hose trick really work? Which hose do you make the installation? I would assume on the upper return line.
 

·
Registered
Joined
·
10,587 Posts
IIRC, the trans cooler lines are 5/16"...I usually just use 300 psi neoprene hose from the shop. Using a hose which can handle the temps, vibration and pressure is the important thing. Pressure won't be that much but temps and vibration can take their toll.

I recall someone posting a source for the Gano filters recently...you might want to search for it.
 
1 - 2 of 2 Posts
Top