Try again for photo

1 - 1 of 1 Posts

AussieMustang

Registered

Joined Mar 6, 2001

1,376 Posts

Discussion Starter • #1 • Mar 14, 2001

any luck

If at first you don't succeed , find a bigger hammer
http://albums.photopoint.com/j/view?u=1584152&a=12055089&p=43600042.jpg

1 - 1 of 1 Posts

Recommended Reading

Are these Headers still good?

Vintage Mustang Forum

I'm in the process of converting my 65 auto to a manual and along the way I had to remove the headers to get the C-4 out and install and set up the equalizer bar. Now I'm ready to put them back in but I noticed the flanges have cracks where the bolts go thorough... Am I okay to re-install and...
- 2
- 44
- xela.zue · updated 48 m ago
69 Mach one 351 W

Vintage Mustang Forum

Hello all, Question of the day! I have a 69 mach one with the original 351 W 2 barrel Im planning on having the engine rebuilt this coming winter with some performance upgrades and Im curious if I end up needing to go with a 4 barrel carb. Which I already have a factory intake for, will I need...
- 0
- 7
- marshall · updated 52 m ago
Brake conversion: 4 lug to 5 lug

Vintage Mustang Forum

Any thoughts about keeping 4 lug or changing it to 5 lug? And any recommendation where to buy them?
- 1
- 66
- KC66 · updated 3 h ago
Why am I getting a draft coming through my steering column on my 1967 Mustang?

Vintage Mustang Forum

Hey guys, I recently had to replace my column when I upgraded to the Borgeson steering box on my 1967 Mustang. Everything went in smoothly and works fantastic. But - I've noticed a draft coming from the column right where the steering column brace wraps around the column. See pic. Why am I...
- 4
- 125
- C
  ClassicNation · updated 3 h ago
Got my T5!

Vintage Mustang Forum

Well after lots of searching, want adds, bartering, "horse trading" I finally have a T5 to put in my car. I'm into it for $150 CAD ($110 USD) From all the research I did this will work fine for my "stockish" Sunday driver car. 1968 mustang 289, 3 speed. I will use my existing clutch and...
- 37
- 674
- Stangfire · updated 3 h ago