Vintage Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3,047 Posts
Discussion Starter #1
After having rack and pinion, all the sloppiness in steering became very evident. I have traced some of it into right side UCA. The ball joint is loose. The wheel can be shaken when the brakes are on, so it is not loose bearings. Although adjustable TCPs would be fine they are also a bit pricey compared to standard aftermarket.

I won't rebuild the old ones, I will buy a new UCAs. What brands have you tried? Somebody wrote about Canadians' UCAs and interference with 16" wheel. Who owns Moog nowadays, is it still the best?
 

·
Registered
Joined
·
2,750 Posts
Cobra makes a boxed versions of the factory UCA. Might want to check pricing on these before rebuilding yours. Properly rebuilt UCA's can be just as good as any reproduction UCA. TRW makes a nice rebuild kit.
 
1 - 2 of 2 Posts
Top