looks like a pretty good article too!
http://www.customclassictrucks.com/editorial/article.jsp?id=5653
Greg
http://www.customclassictrucks.com/editorial/article.jsp?id=5653
Greg
Unusual place to find framerail resto.....
Join the discussion
Recommended Reading
-
Picking an engine?
Vintage Mustang ForumI would like to hear some opinions before I purchase or build an engine. I'm getting close to the point of an engine. I have a core for a 1976-302 or a 1984-351 not sure of which one I would like as my finished engine. I am not building a show car, but a nice muscle car to drive on weekends. I...- 9
- 423
-
7Dpilot · updated
-
Need Chassis Measurement Please
Vintage Mustang ForumHi everyone, I'm getting ready to weld in my new front frame rails and the extensions. I was hoping several people could help me verify a dimension. As one could observe from the Liskey drawing above is that it seems like the front frame rail extension is in-line and parallel to the rear...- 2
- 55
-
7T02S · updated
-
Shifter problem help please
Vintage Mustang ForumOk. Let me give you the run down.... 1. I have a 1965 Mustang 6 cyl 3 speed 2.77 transmission. Removed the tired engine and transmission. 2. Bought a 1966 Mustang 6 cyl 3 speed 3.03 transmission set up with a 1969 shifter rods and 1969 shifter. I placed the 1966 set up into my 1965, but...- 6
- 213
-
ILuv65FB · updated
-
Best outdoor car cover (weather resistant)?
Vintage Mustang ForumBreaks my heart but my '68 coupe has to spend the winter outdoors, in CA it's not that bad, however I want to protect it from RAIN, sun, etc. Did some searching here and the posts were very old or from the manufacturers - would love to hear all your fave brands, good/bad experiences and also the...- 6
- 70
-
Fit almost any engine to a GM tranny
Vintage Mustang ForumLooks like they have a wide variety of bellhousings and they specifically call out the FE.- 4
- 46
-
swooshdave · updated
Join now to ask and comment!