G
Guest
·Guest
Joined
·
0 Posts
Are the Vent Window frame on a 67 Fastback the same from a 67 Coupe???
Vent window frames
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Where Is Coolant Temp Port?
Vintage Mustang ForumMy factory coolant temp gauge (the electrical one in the dash cluster) has a sensing unit threaded just in front of my carb. I want to install a mechanical / analog temp gauge to compare the two temp readings. Where is a second port that I can use to attach the bulb? Here are pics of my...- 8
- 183
-
66#3 · updated
-
Vacuum Canister Alternatives for 1968 with Factory Air
Vintage Mustang ForumGuys, I need a vacuum canister for my 68 fastback with factory air. I can't get a hold of Classic Auto Air to find out if they have any in stock and when it would ship. I'm close to getting my A/C up and running again. So, my options; 1. An alternative that would fit the hole in the...- 8
- 146
-
Edelbrock Pro Flo 4
Vintage Mustang ForumGood morning everyone- I am planning to add EFI to my car over the winter and am wondering if anyone has experience with the Pro Flo 4. The Holley Sniper is a popular option and I’ve been thinking a lot about it, but can’t help but wonder if it’s somewhat antiquated at this point. Edelbrock...- 208
- 18K
-
Quicksilver66 · updated
-
Headliner Install Question
Vintage Mustang ForumGetting ready to install headliner in my 67 coupe and have a couple questions. The glass is all removed. 1) Does the headliner get glued to both the interior and exterior side of the pinch weld or just the exterior? 2) Can 3m weatherstrip adhesive be used or should I go with the weld-on...- 1
- 23
-
Roadtrip!
Vintage Mustang ForumHi Everyone, I've been reading a lot more than posting for the last few years, but that might change a bit considering my current undertaking. I'm roadtripping across the USA in my '69 Cougar. For those who don't know, the Cougar is basically a Mustang with different sheetmetal and a 3" longer...- 2
- 77
Join now to ask and comment!