Vintage Mustang Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
507 Posts
now that you have the vent window frame out. the vent window is held in with a nut. remove the nut and pull the window down and the pin will come out of the top of the frame. the install is the reverse. just remember the order in which the plastic and other washers come off!
 

·
Registered
Joined
·
507 Posts
i did forget to say that after emoving the nut and spring, etc. you push the window up so the screw clears the frame and then pull down, for the peg to come out of the top of the frame.
 
1 - 2 of 2 Posts
Top