Vintage Mustang Forums banner

Very (Scary) Loose front end on 66, any suggestions?

2002 Views 8 Replies 5 Participants Last post by  Guest
I have a 66 Convert that I finally got on the road after a bunch of engine work. Once at highway speeds and large bump in the road sends the car swerving of the's very sketchy to say the least. Any suggestions (Do I need a susp rebuild?) I have not messed with the suspension yet at all (Except new shocks up front). However, the engine mods have left my car about 75-90 pouns lighter up front. Now the body rests way higher (I am planning new coils with a 1 inch drop)

66 GT RagTop
Edelbrock Heads
Edelbrock 600cfm Carb
Edelbrock Intake
1 - 1 of 1 Posts

· Registered
6,700 Posts
Since you've removed some weight from the front end, I would recomend getting a front end alignment right away, then you can plan your ultimate solution. I suspect that the alignment settings have changed a little, and it is causing the car to be squirrelly.

Steve Leslie, 65 coupe in restoration. 302, toploader, A/C, disc brakes, bench seat
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.