were do you get mustang checkbooks?
1 - 3 of 3 Posts
Joined
·
3,824 Posts
I don't have these, but their add was in latest issue of Mustangs & Fords:
www.styleschecks.com
www.styleschecks.com
Joined
·
553 Posts
sweet I just moved into a new apartment, now I need new checks so looks like I will be grabbing me some of these.
In case you didnt already browse the website.
http://www.styleschecks.com/jsp/SiteNavigator.jsp?page=cgi-bin/ncommerce3/CategoryDisplay&cgmenbr=422330&cgrfnbr=666533&merfnbr=422330&showCgpImg=yes&crpcgnbr=666521
In case you didnt already browse the website.
http://www.styleschecks.com/jsp/SiteNavigator.jsp?page=cgi-bin/ncommerce3/CategoryDisplay&cgmenbr=422330&cgrfnbr=666533&merfnbr=422330&showCgpImg=yes&crpcgnbr=666521
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Seeking a part name
Vintage Mustang ForumAnyone know what these parts are called? I've searched under numerous catalogues for "exterior trim" but can't find them anywhere. (If you can't see the photo, I'm referring to the trimming that runs along the side of my 66 front the front fender, along the door, and to the rear fender...- 1
- 0
-
rui-1975 · updated
-
New T5 grinding into gears
Vintage Mustang ForumJust picked up my '65 6 cylinder from having a T5 installed last week. It gets off the line so much better than with the old 3 spd. However, unless I'm at the perfect speed it grinds going into 2nd and 3rd. Haven't noticed it as much going into 4th but some. My question is do you think this is...- 60
- 2K
-
Want to install 5.0 EFI engine
Vintage Mustang ForumHey everyone, I have a 66 with a T5 and a tired old 289. I'd like to install a nice running 1989 mustang 5.0 HO I found from a local foxbody guy. The problem is, I only know carburetors. Like all of us, I'm doing this on a budget. I'm also not familiar with fuel cells. My understanding is...- 12
- 730
-
1967 coupe/fastback versus convertible full rear frame rails
Vintage Mustang ForumI am starting repairs on my 1967 fastback. I will be installing new full rear frame rails with torque boxes and I plan on adding the convertible inner rockers. Is the only difference between fastback and convertible rear rails is the width of the torque box? I am wondering if it would make...- 2
- 88
-
wils1514 · updated
-
Comp Numbers 66 289 with Twisted Wedge 170 61cc
Vintage Mustang ForumTrying to do some compression number calcs to see if these heads would be a good fit for my 289. Currently a stock 66 289. Twisted Wedge 170 w/ dual springs and 61cc chambers What's the stock comp #s with factory heads? What would the comp be with the 61cc chambers on the TW? Plans are for a...- 20
- 402
-
cturboaddict · updated
Join now to ask and comment!