Joined
·
17,130 Posts
http://users.zoominternet.net/~dodgeram/ENGIN025.jpg
What all the ladies want..and the fellas need o/t
1 - 4 of 4 Posts
Joined
·
20,887 Posts
Hey buddy, that's some big C6 you have there, heheheheh.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
67-68 A/C Vacuum Lines Through Firewall - Seal?
Vintage Mustang ForumIs there a seal or grommet around the two vacuum hoses through the firewall for the A/C valve and vacuum reservoir (see my index and middle finger)?- 8
- 311
-
Got my T5!
Vintage Mustang ForumWell after lots of searching, want adds, bartering, "horse trading" I finally have a T5 to put in my car. I'm into it for $150 CAD ($110 USD) From all the research I did this will work fine for my "stockish" Sunday driver car. 1968 mustang 289, 3 speed. I will use my existing clutch and...- 95
- 2K
-
Stangfire · updated
-
Headers for 66 Mustang + Power Steering?
Vintage Mustang ForumI'm in the market for a set of headers for a 66 with a 289 that has power steering. Does anyone have suggestions for a set that doesn't require the power steering drop bracket? I saw some pretty olds posts on this topic but am wondering if there are any more recent recommendations.- 34
- 1K
-
Urban legend? Cheap & easy GT40P header fit trick
Vintage Mustang ForumDisclaimer: I have no hands on experience on this, just something I heard. A somewhat reputable source told me that many (most?) SBF headers can be made to fit GT40P heads by adding a header flange and using it like a spacer. You know, the bare flanges used for custom fabbed headers like these...- 10
- 160
-
BlakeTX · updated
-
Electrical gremlins are out to get me I think.
Vintage Mustang ForumSo I did a little cleaning on the engine bay today. This included taking off oil pressure gauge line to oil pressure sending unit and cleaning it. Put it back on and now gauge does not read correctly. Car has new sending unit. Any ideas? I made sure fitting is snug against sending unit. I do...- 17
- 329
-
jperls · updated
Join now to ask and comment!