Where can I get Bob Mannel's engine book?
Join the discussion
Recommended Reading
-
Under Radiator Shroud or Panel
Vintage Mustang ForumAnybody running a shroud or panel under the radiator like modern cars? I recently took out a perfectly good radiator at an autocross due to a rock getting between the radiator and engine and bouncing into the radiator and taking out 4 rows when it bounced off the fan. Maybe it was a 1 in a...- 4
- 114
-
Nailbender · updated
-
1967 early mustang windshield washer bag bracket
Vintage Mustang ForumCan anyone provide me with the dimensions of the windshield washer bag bracket that is found on early 1967 mustangs? I have had no luck in finding a used one and they aren't available repro. This bracket is spot welded to the driver side inner fender apron.- 5
- 75
-
wils1514 · updated
-
enggine shuts off after reaching operating temp
Vintage Mustang ForumNeed help with my 65 mustang fsbk it has a 302 8000 miles on engine new demon carb / fuel pump, pentroneix distributor and coil car starts and run well but after it runs for a few minutes it just shuts off as if I turned the ignition off will attempt to start but wont until it fully cools...- 1
- 14
-
Title of 65 shows 1964 why
Vintage Mustang ForumI bought a 1965 vin# 5R07C147717 on title and door tag. Title shows it as 1964. WHY? Door tag is 65A J 26 14K 75 6 6. So it was produced On 14-OCT 1964 After July it should be 1965. It does have some of the 64.5 features like spare tire hold down as a groove not a J hook type, Door handles...- 20
- 475
-
Fireball 65 · updated
-
Edelbrock Pro Flo 4
Vintage Mustang ForumGood morning everyone- I am planning to add EFI to my car over the winter and am wondering if anyone has experience with the Pro Flo 4. The Holley Sniper is a popular option and I’ve been thinking a lot about it, but can’t help but wonder if it’s somewhat antiquated at this point. Edelbrock...- 197
- 17K
-
Quicksilver66 · updated
Join now to ask and comment!