Where to buy ?
Join the discussion
Recommended Reading
-
Seat placement for tall guy in a 66 Mustang
Vintage Mustang ForumOkay, I’m 6 foot 4+, with a weird long torso. 6’ 4 1/2” with a 32 inch inseam. My sons 66 Mustang, recently officially became my 66 Mustang. What I’m looking for is if anyone has seen or created a formula for seat placement based on body dimensions. I know that I can get seat rail extenders...- 12
- 192
-
+----THE Definitive Highland Green Thread----+
Vintage Mustang ForumHighland Green[/color] Info: Sometimes refered to as "McQueen Green." Color Code: R Color #: Ditzler #43644 Description: Dark metallic green. One year only. 1967's Dark Moss Green gave way to this color, DMG has a "bluer tinge". More olive and more metallic than the Dark Highland Green of...- 22
- 14K
-
TrueBlue · updated
-
MPG concern
Vintage Mustang ForumHi all! I didn't want to hijack the other thread I was looking in so I thought I'd start a new one. As others in that thread stated they are getting at least 20 mpg, but after some calculating I did when I filled up on Monday I found out I'm getting about 11. I don't have a lead foot, but will...- 27
- 387
-
guitarman584 · updated
-
Header Fit
Vintage Mustang ForumHey guys I have a 67 mustang with a 302 from a 68 and a c6 transmission from (not sure where). Here’s the things, I know a c6 is a bit bigger transmission so I’m not sure which headers to get. Should I go with shortys or long tubes? Anyone recommend any specific ones? Thanks!- 3
- 96
-
Tailshaft Bushing Replacement- 3 Speed
Vintage Mustang ForumCan the tail housing on a 2.77 3 speed be removed with the transmission in the car without the needle bearings for the output shaft falling into the case? I need to replace the tail shaft bushing and seal but I don't have the special tool to remove the bushing. Im thinking that if I keep the...- 1
- 33
-
Fitch · updated
Join now to ask and comment!