Vintage Mustang Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
656 Posts
Discussion Starter #1
I've decided to do the UCA relocation and I'm supposed to drill the new holes 17/32", but I've found that Lowes and Home Depot don't sell the right sized drill bit. Where can I go to find such a beast?

Thanks
 

·
Premium Member
Joined
·
3,637 Posts
Remember when drilling, you want to GRADUALY work your way up to 17/32" Don't try to hog it all out at once. Otherwise you stand a good chance of the drill ripping your arm off when it suddenly jambs :: Not to mention ending up with a nasty looking hole :p
 

·
Registered
Joined
·
656 Posts
Discussion Starter #5
Thanks for the tip! I've been researching this project for a while now and that seems to be a common recommendation. It must be a good one.

I'm off to Sears now for a drill bit...
 

·
Registered
Joined
·
656 Posts
Discussion Starter #6
Sorry dude, Sears doesn't carry such a drill bit... at all.

I had to go to Tacoma Screw, they had it in stock but it was kind of expensive.

Thanks anyways...
 

·
Registered
Joined
·
656 Posts
Discussion Starter #9
Hey, no problem...

You previously gave me some really really good info on where to find weld thru primer, seam sealer, and spot weld cutters. I was able to have them in my hands shortly after you gave me the info. You were my heeerooo...

Sears wasn't a bad suggestion, though. The person at Sears sent me to Tacoma Screw. So I guess you were right after all... kinda... sorta... at least they fixed me up.

Thanks :)
 

·
Premium Member
Joined
·
4,928 Posts
Just chipping away at that "Respect and admire" thing ya had going huh? :: ::
 
1 - 12 of 12 Posts
Top