Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello,

On front axle of my car, most of the rubber bellows are dry or have cuts while the joint ball have themselves no loose and are still well lubricated.
So I would like to replace only the bellow but I cannot find supplier for that.
I would appreciate your suggestions.
Thanks a lot in advance,
AlainB
 

·
Registered
Joined
·
35,465 Posts
Just about any of the Mustang "supply houses" or decent auto parts stores. Just ask/look for ball joint and/or tie rod end "boots".
 

·
Registered
Joined
·
231 Posts
I agree they are available but every parts store I ever tried told me they weren’t. It wasn’t til the internet I found out you could buy just the boot or bellows. I’d order from a Mustang vendor.
 

·
Premium Member
Joined
·
11,747 Posts
Don't be surprised if the rubber boots that are currently available crack and split within a year or so of installation. Cheap chinese rubber. Look for some made of polyurethane.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #5
Thanks to all - it has already helped me - I have ordered polyurethane ones for the drive - not yet succeeded to measure the control arms ones .
 
1 - 5 of 5 Posts
Top