Vintage Mustang Forums banner

Will '67 steering wheel mount on '68 column?

430 Views 2 Replies 3 Participants Last post by  289fan
I may have found a good steering wheel, but it is off a '67. Will it mount directly to a '68 column without alterations?

1 - 3 of 3 Posts
'67 had 2 types of steering columns from the factory .... the '66 and earlier style and the '68 and later style. Same wheel worked on both.

The original '68 wheel is nothing to look at so good choice there.
You may find the '67 steering wheel a slightly smaller diameter than the column, roughly 3/8ths to 1/2 inch in total diameter, so the gap's half of that. It'll fit on the column though. IIRC the additional diameter is due to the design of the collapsible column.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.