Joined
·
3,220 Posts
Or is the deck height different?
Will a 4bbl intake from a 390 fit a 352?
Join the discussion
Recommended Reading
-
Sheet Metal Alignment
Vintage Mustang ForumA couple questions: The tops of my fender aprons where the fenders bolt on are a bit wavy. Should these surfaces be flat? The top of my radiator core support bends in slightly toward the firewall. Should the top of the core support be straight?- 4
- 79
-
bmcgc · updated
-
Friday Evening Drive - Temperature check
Vintage Mustang ForumAfter reading all the threads on operating temps, correct thermostats and overheating over the years, I wanted to really check mine out. I brought home a thermal IR gun from work. Started the car and watched the temp rise right at the temperature sensor. Check temp, look at gauge, check...- 0
- 0
-
daves67ss · updated
-
So Close Yet So Far
Vintage Mustang ForumSanding, sanding and more sanding. Working from the firewall foreword. Every time I think that I am getting ready for a final primer coat I decide that an area or two needs a little bit more work. I pulled the hood today, so the apron behind the hinges needs some prep work. Since the hood is...- 3
- 75
-
bmcgc · updated
-
Online shops located in Europe?
Vintage Mustang ForumHi. I have found only a few small online shops for Classic Mustang parts, located in Europe. Does someone know some good ones so i dont need to spend on high shipping costs.? Could be Poland, Germany, etc.- 0
- 5
-
TomyJay · updated
-
Vacuum Help
Vintage Mustang ForumHey guys, I’ve got a vacuum leak coming from my carburetor spacer. I used new gaskets when I was installing it, but the engine increases in RPM when I spray carb cleaner on it. Car has a hissing sound when running and doesn’t idle smooth. How can I ensure I install the new carburetor gaskets...- 52
- 1K
-
alex1965 · updated
Join now to ask and comment!