Will new mustang wheels fit on vintage mustangs?
1 - 5 of 5 Posts
Joined
·
1,892 Posts
What size wheels are you thinking about? It is possible to fit some new 17x8 "bullitt wheels" on classic Stangs using an adapter kit. NPD has the kit for $299.95 (I just got the catalog recently, so I still have it with me 
) Hope that's what you were lookin' for...
) Hope that's what you were lookin' for...
Joined
·
182 Posts
Try doing a search...there's plenty of info here about it. You'll need spacers to make them fit, because they hit the upper control arm in the front. I just installed '99 cobra wheels 17x8, 5.72" b/s on my '69 using 1.25" bolt-on wheel spacers. If you want to go this route, pm me and I'll give you the info on where I got these custom spacers for $205 shipped. Found all the info I needed right here.
Joined
·
227 Posts
I sent you an e-mail with pics of the spacers ---installed
Joined
·
5,196 Posts
So, you want late-model wheels on your vintage Stang, once again.... ::
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
MPG concern
Vintage Mustang ForumHi all! I didn't want to hijack the other thread I was looking in so I thought I'd start a new one. As others in that thread stated they are getting at least 20 mpg, but after some calculating I did when I filled up on Monday I found out I'm getting about 11. I don't have a lead foot, but will...- 1
- 0
-
guitarman584 · updated
-
New member here- newbie 289 replacement questions
Vintage Mustang ForumI have a '66 coupe 289, mostly stock, but previous owner installed a T5 transmission that came from a late 80's mustang. A couple days ago a piston rod blew through the oil pan, so now I'm considering replacement options. A local mechanic told me to look at Blueprint Engines, as it is a good...- 16
- 509
-
The good ole 289. What's it's weakness?
Vintage Mustang ForumWanted to ponder a question across you guys. (My car is at the body shop, so I'm loosing my mind waiting for it to get done) In the terms of performance from the 289, a good 4b carb and intake is a gimmie. But what's the 289 biggest weakness? My wild guess would be the heads? Just curious for...- 34
- 906
-
cturboaddict · updated
-
Original Venice Crew's 1965 Shelby GT350 Competition Continuation - Jay Leno’s Garage
Vintage Mustang ForumThere's quite a bit of good information here;- 21
- 606
-
Differential identification (NO TAG)
Vintage Mustang Forum1970 mustang coupe diff identification. Well it could be a different one from what it came stock. I’ve done some research and just got confused with how to identify a diff without a tag. At this point I thought I’d ask here how to figure out exactly what diff I have. I post some pics in a bit- 12
- 209
-
Jr_Palm · updated
Join now to ask and comment!