Vintage Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
354 Posts
Discussion Starter #1
I have been looking for a replacement set of wheels for 67 FB and I ran across the American Racing Cobra wheels that look very similar to the Team III wheels.

I wish to run 17" wheels and was wondering what are the front and rear specs I need to use to avoid all rubbing issues.

I ran across these fronts which are 17 x 7 with a 3.5" backspace (-12 offset).
Will these work? What sizes should I run on the back? 17 x 9 with what backspacing/offset?

:shrug:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250429674306

http://i20.ebayimg.com/04/i/001/2c/62/111b_1.JPG

Thanks in advance!
 

·
Registered
Joined
·
197 Posts
With only 3.5 backspacing... you will probably be pushing it out and will more then likely have to roll the fenders. But a good place to check is this site.

http://www.dodgestang.com/mustang.htm

Should give you a good idea of what your options of sizes and what you will have to do. Good luck either way.
 
1 - 2 of 2 Posts
Top