G
Guest
·Guest
Joined
·
0 Posts
Im just wandering if this toploader will work with my cleveland and if its worth buying. http:// / /ws/ ? &item=1846220776
Thanks John
Thanks John
Will This Toploader Work With My Cleveland
1 - 3 of 3 Posts
Joined
·
6,782 Posts
Mark knows, look here. you can also PM Mark_at_TH. My first impression is that the tailshaft may be too short.
Joined
·
6,031 Posts
Heya John-
NO! It will NOT work in the condition it is in. You WILL need a different tailhousing. A Mustang Toploader has its shifter located at the END of the tailhousing... the one you (attempted) to link to was in the middle.
NO! It will NOT work in the condition it is in. You WILL need a different tailhousing. A Mustang Toploader has its shifter located at the END of the tailhousing... the one you (attempted) to link to was in the middle.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Need Chassis Measurement Please
Vintage Mustang ForumHi everyone, I'm getting ready to weld in my new front frame rails and the extensions. I was hoping several people could help me verify a dimension. As one could observe from the Liskey drawing above is that it seems like the front frame rail extension is in-line and parallel to the rear...- 3
- 111
-
7T02S · updated
-
Any opinions on these seats?
Vintage Mustang ForumI currently have a bench seat. I realize they are rare and when I owned my 65' back in the 80's everybody would ooh and ahh when they saw a bench seat. I prefer the buckets any day over the bench seat...but I will keep the bench seat because it is rare in the garage for people to sit on. So I'm...- 23
- 1K
-
Shinobi68 · updated
-
Front bench seat upholstery
Vintage Mustang ForumGetting ready to recover my 67 bench. For those that have done this which brand of upholstery did you buy? Are you happy with it? If you had it to do over would you have done something different? Thanks for the help- 2
- 116
-
Danny Tietz · updated
-
Best outdoor car cover (weather resistant)?
Vintage Mustang ForumBreaks my heart but my '68 coupe has to spend the winter outdoors, in CA it's not that bad, however I want to protect it from RAIN, sun, etc. Did some searching here and the posts were very old or from the manufacturers - would love to hear all your fave brands, good/bad experiences and also the...- 8
- 109
-
Picking an engine?
Vintage Mustang ForumI would like to hear some opinions before I purchase or build an engine. I'm getting close to the point of an engine. I have a core for a 1976-302 or a 1984-351 not sure of which one I would like as my finished engine. I am not building a show car, but a nice muscle car to drive on weekends. I...- 13
- 526
-
7Dpilot · updated
Join now to ask and comment!