[Guest]

What I need to know is where the bottom alternator bracket connects. The only hole left in the bottom area of the water pump is just above the balancer (very close and not very deep). Also this seems to be to far ( close to center of the engine) over to allow for adjustment.

 

[Ray_Hillebrand]

IIRC the alternator bolts to the head with a spacer on the back side of the alternator. The top bracket bolts to the intake and the waterpump...

 

[Guest]

thanks for the info, can you tell me where the bottom braket ( the one with the slide hole) mounts. Motor was disassembled when I started so a few of these things are unclear to me. Thanks Joe

 

[Guest]

Also, using the bracket on the front end of the head to bolt to, pushes the dip stick tube out of the way, How does this fit in?

 

[66conv6]

MustangSteve knows a lot about 351W. Try him:

http://members.boardhost.com/MustangSteve/

 

[GypsyR]

Here's 1000 words. Well, maybe 500. Light's failing and cheapo camera has no flash. This a busted 351W I have laying around. The only currently sporting the water pump and alternator brackets. Hope this is some help.
http://a3.cpimg.com/image/E3/FF/10570723-256c-00800060-.jpg