Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Anyone know how to wire power to the top switch in a 1969 Mustang Conv. The Shop Manual says it is wired directly to the battery with a Circuit Breaker in between but shows no diagram or information about the circuit breaker.

Phil
 

·
Registered
Joined
·
462 Posts
Assuming it is the same as the earlier cars, the circuit breaker is on the battery side of the starter solenoid. There is a tab that comes off of the post where the positive battery cable attaches to the solenoid. One side of the circuit breaker attaches to the tab and the other side attaches to the wire that goes to the top switch.
 
1 - 5 of 5 Posts
Top