Joined
·
91 Posts
Ok, guys I applied for a loan to buy a project Mach1, tommarow I am going to the bank bright and early. I hope i was approved reall nervous. Pray for me. ::
WishMeLuck
1 - 4 of 4 Posts
Joined
·
91 Posts
69 ::
Joined
·
5,383 Posts
Good luck, let us know how it went
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Don't be like me...
Vintage Mustang ForumSo I have recently been working a lot. I am a PA working in then Army and I am in a 18 month program to specialize in Emergency Medicine. This past month I have been working 12 hour days 6 days a week plus extra time spent on research project, and didactic training. Anyway the past week has been...- 7
- 141
-
Sway bar wont fit lowered 67 coupe *pics
Vintage Mustang ForumSo i decided it would be a good idea to cut a coil out of my new scott drake springs. I think i cut too much... the spring basically falls out of the car now, absolutely no need for a coil spring compressor. While my car was on the lift the springs just bounced around, wasn't until i attached...- 11
- 281
-
Really struggling with brakes, drum rear, disc front
Vintage Mustang ForumTrying to get to first drive and I am now down to brakes. Right now car is on jack stands in the rear with an open diff, stock converter in the trans. When I put the car in gear at idle of course the passenger side wheel turns. I cannot get the wheels to stop with strong effort on the brake...- 10
- 142
-
Tallguy · updated
-
Electronic problems
Vintage Mustang ForumHello everyone: I've got a 67 fastback with a 289 4bbl and 4speed toploader. I've got a tribute tachometer in place of the am/temp guage that was working at one point along will all other electronics. One day the tach quit along with the turn signals, fuel gauge, temp gauge, heater fan and...- 6
- 344
-
Best outdoor car cover (weather resistant)?
Vintage Mustang ForumBreaks my heart but my '68 coupe has to spend the winter outdoors, in CA it's not that bad, however I want to protect it from RAIN, sun, etc. Did some searching here and the posts were very old or from the manufacturers - would love to hear all your fave brands, good/bad experiences and also the...- 11
- 338
Join now to ask and comment!