YES-YES-YES
1 - 8 of 8 Posts
Joined
·
6,031 Posts
yeah, I had to reread it too! I was like, "your boss? huh?"
Joined
·
829 Posts
Joined
·
925 Posts
Yeah, Mark! It was a great show and alot of good competition in the Boss 302 class. Congratulations!
http://home.earthlink.net/~pinpress/SAAC002.jpg
http://home.earthlink.net/~pinpress/SAAC27sm.jpg
More SAAC 27 Pictures
http://home.earthlink.net/~pinpress/SAAC002.jpg
http://home.earthlink.net/~pinpress/SAAC27sm.jpg
More SAAC 27 Pictures
1 - 8 of 8 Posts
Join the discussion
Recommended Reading
-
Want to install electric or hot air choke on a 302 (holley carb)
Vintage Mustang ForumI have a 1965 coupe with a mid 70's 302 in it, Holley carb. I have been tuning the car and got her running great once warmed up, however on startup when cold she is rough and I need to engage the choke (car previously had manual choke which was not working properly) - with proper choke she...- 15
- 170
-
My rear breaks saga
Vintage Mustang ForumHi All So I'm replacing my rear brakes, y'all helped me eval the old in a recent post, and now I'm replacing them. But i have some issues. So I thought I'd start asking. I bought the off the shelf rear drum set of self adjuster, springs and pads. But I see some inconsistencies between what i...- 0
- 0
-
DoctorC · updated
-
What distributor gear are you using?
Vintage Mustang ForumSo like a million other people on the planet I have been going round and round trying to figure out the proper distributor gear to get. I have a billet cam but it's made from 5150 steel not 8620. I don't want to use a bronze gear. thinking melonite one or composite. I trust real world advice on...- 17
- 284
-
Ron French · updated
-
1965 with a 302 (unknown year) need new radiator hoses.
Vintage Mustang ForumHi all, I recently acquired my father 1965 coupe, it had a 6 cylinder which was swapped out at some point with 302. My issue is I am unable to ID this engine (he was not sure but thought he remembered it being a late 70's 302). I am just started to learn but dont know much. It seems I would need...- 10
- 264
-
Street or track 3 Link?
Vintage Mustang ForumI’m going to send an email to Shaun but though I will ask here since some of you have installed his 3 link. I am installing the brackets on my 9” and all seems to be going well as his instructions are very good. My rear is narrowed 3+” and the brackets on the top of the housing are offset like...- 3
- 188
-
66Ccode · updated
Join now to ask and comment!