Zooming In
1 - 6 of 6 Posts
G
Guest
·Guest
Joined
·
0 Posts
hmmm, it doesnt work for me..whats up?
mike o
'65 wimbledon white original coupe I6
'99 silver convertible V6
mike o
'65 wimbledon white original coupe I6
'99 silver convertible V6
Doesn't work for me either..........There are many Gremlins here!!!!!!!
AKA "Fastbackpimp"
65 Fastback
http://hometown.aol.com//dasbus73/Index.html
AKA "Fastbackpimp"
65 Fastback
http://hometown.aol.com//dasbus73/Index.html
G
Guest
·Guest
Joined
·
0 Posts
yeah, im using Explorer 5, ver 7.0.0
does it zoom automatically when you right click, of show a menu box with a zoom option?
just curious
mike o
[color:blue]'65 wimbledon white original coupe I6
'99 silver convertible V6
Check out Mike & Jackie's '65 Mustang </font color=blue>
does it zoom automatically when you right click, of show a menu box with a zoom option?
just curious
mike o
[color:blue]'65 wimbledon white original coupe I6
'99 silver convertible V6
Check out Mike & Jackie's '65 Mustang </font color=blue>
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
1965 A Code 289 4 speed clutch size
Vintage Mustang ForumHi all, can anyone recommend a good quality New Clutch assembly with release bearing and spigot shaft bearing 65 A code GT 4 spd assuming the engine is orig (which I don't know) Are they likely to be 10” or 10.4” from factory or is it a crap shoot, I had a clutch fork & release bearing failure...- 1
- 9
-
fastbackbhoy · updated
-
66 Hipo spun rod bearing
Vintage Mustang ForumHi all, I need some advice. I bought a 1966 k code gt recently and drove it 1200 miles home with the only issue being a bad set of points. I then have the first weekend home with it and I hear a loud clunking sound. I diagnosed it to a spun rod bearing. I dropped the oil pan and the number 5...- 42
- 2K
-
Door scuff plate stainless screw corrosion
Vintage Mustang ForumI pulled my factory original aluminum door scuff plates off and found some significant corrosion around each of the screw holes. I find it interesting that Ford used stainless fasteners for an aluminum plate when stainless is known to corrode aluminum. Maybe that wasn't well known back then...- 0
- 7
-
Brake booster question, which one?
Vintage Mustang ForumI was going to stay manual brakes but since my engine is out and I am adding borgeson steering I've decided to go with power brakes. Up front I have Wilwood discs and on the rear I have 2003 Cobra disc brakes mounted to Mustang Steve brackets. I also have a Wilwood adjustable proportioning...- 5
- 197
-
mikec35 · updated
-
Too hot to work on the Mustang, so I improvised.
Vintage Mustang ForumIt’s about 100 degrees here in sunny North Texas. Feels even hotter. We’ve got too much to do on my daughter’s car, so it’s time to get creative. I would have gotten a single larger unit, but my in-laws had these two 5,000btu units new in the box, so I’m giving them a test drive. After an hour...- 38
- 896
-
BlakeTX · updated
Join now to ask and comment!