[krankensteine]

Just finishing off a lengthy restoration and after installing front turn signals there is a very apparent problem. Turn signals do not line up with the front valance. We have ordered 2 new valances from different vendors and they all measure up the same. I do have the correct 70 turn signal and a pair of original 69 signals. 69s look to fit better but the wiring I know is different. Any suggestions would be helpful. See photo

 

[krankensteine]

Yours look to be setting in the valance opening much better. Here's a better look at what I am talking about.

Looks like same as my set-up.