we have a 67 a code fastback for sale that is a previous customers project ....We built this car as a street rod eleanor type car last year and after we finished the car was involved in a minor accident..rather than repair the car as it was he decided to go a differnt route and essentially parted the car out and built a drag car....which made some sense considering this car was built with a John Urst built 408 windsor with edelbrock victor senior heads,,yes senior not junior,,,these are the heads that require the larger exhaust flange pattern ,,the posrt on these heads are huge...it was fuel injected with a XX-trim vortech super charger an air to air intercooler, and a t56 6 speed trans....it also had mustang II style front suspension and our own triangulated 4 link rear suspension which uses coil overs instead of the leaf springs...none ,,,i repeat NONE of these parts are included these all went to his new race car....i do have literally hundreds of pictures of this car picturing the way it was built etc,,and will send upon request....parts it does still include are,,,new floor pans, new firewall, new quarter panels, new 8 point cage,,new front frame rails , and engine comp aprons, new rear frame rails, rear 4 link mounts,....as said above this is a rist free car....other add ons that are still included are that the car was undercoated completely with POR-15 as well as the entire interior and cowl area was coated with por-15...also still in the car is the entire spectra sound deadening stystem,,if you are familiar with car stereo you probably know of this stuff....its a polymer resin that is appliead over the floors, firewall and entire trunk..it essentially seals the car off like one huge speaker box....on top of that a heat blanket type material goes on ,,then on top of that a mattalic "dynamat" type material goes on..this car has these steos done over every inch of teh interior space,,teh whole firewall, floors, up the sides of the sail panels, all the way to thr trunk,,the whols trunk,,drop offs,,inside of the quarters etc....eveything....this thing was super quiet inside...no noise whatsoever....and cuts out all heat from headers engine..etc.,.,this system for 1 car cost us $2400....i can look up their website if you would like to read more info on this sound deadening stystem...there is a 8 inch rear under teh car for transport,,,and will have a rolling frame up front so it wil be easy to load...what you are getting is a rolling shell,,,no glass,,rust free,,with cage ,,2 brand new doors with handles and locks shaved...could be easily built to orignal specs if you like,,or great platform to modify further....if you would like us to preform any work on this we can as we are a full service restoration shop....we could paint it for you in your color choice and you could preform the mechanicals etc...anything you can dream up we can do...please email me at jackhall@hallsresto.com for pics...or check our website and i will have some pics uploaded by tommorow...if you would like to see this car in its nearly finsihed form go to our site at WWW.Hallsresto.com and go to the project gallery page and scroll down to the grey with burgandy stripe fastback with the trick looking engine compartement...thats it....asking $6500 and we take credit cards over the phone if it helps....also will isten to all offers...contact us at the email above or at 864-266-1189 dont miss this one it wont last..thanks jack
