[ponyguy]

anyone know what a 67 K code GT fastback goes for these days? Needs full resto top to bottom (floors, quarters rails) but runs good. all numbers on body are there. seems to be the real deal. Has 6000 tach. not sure if drivetrain is original. Email me with any info or interest in buying it. penart7@cox.net

 

[Dan66]

...not sure if drivetrain is original.

Well, that's kinda the deal-breaker right there, isn't it?

 

[aslan]

I would check eBay and some of the other auctions and see what they actually sell for. What I've seen is that with all the Elenor craze, they've really gone through the roof.
Stan

 

[390GTAcv]

If it's a K-code and it has a factory tach , it will only be a 8000 RPM unit ! !

 

[ponyguy]

Ive read that the 4 speed hipo cars had the 8000 tach and the automatic K codes had 6000 or 8000 tach.

 

[frozenphil]

Ive read that the 4 speed hipo cars had the 8000 tach and the automatic K codes had 6000 or 8000 tach.

My 67 GTA K-code doesn't have a tach at all. You have to keep in mind that you could option these cars just about anyway you wanted to.

 

[Roddster]

Before you lay any money down, look for the K in the vin. If you don't see it, well, Ford made less K code cars in 67 then Shelby did. Ok, so, if it was in good shape what would you spend? And, the K engines had the serial number on the block so look for it on the right side below the cyl head.
AND, get the vin and get a "marti Report". This document will tell you what the car was built with, original build date, dealer etc.