Reserve is set at $400

Link

I believe it would work with either Holley or AFBs. It looks to be in good condition. If your willing to drop that kind of change its not a bad deal I guess. Check with Branda and see what a repop or comprable unit sells for.

 

That manifold will only fit AFBs or Edelbrocks. You can see from the pics that the inside carb bolt holes (between the two carbs) are nearly side by side. No way a Holley's float bowls will fit that space (or an autolite or BG, for that matter). One board member who knows these manifolds very well is JP68GTCS. I'd send him a pm. If you want to run Holleys you'll need to look for a "Highrise" dual quad manifold. I'm not sure if they're being reproduced, or what they cost, but here's an ad from the days of yore...

- Gord

 

I thought they ran the Holley carbs turned 90 degrees with this intake with a special linkage.

 

Thanks for the info. I emailed John and he told me everything I wanted to know and more. This manifold uses AFB carbs. The later high rise manifold used Holleys and is being reproduced.

 

I thought they ran the Holley carbs turned 90 degrees with this intake with a special linkage.

You could do that. The problem is that you'd have a 4 cylinder engine until the carburetors' secondaries opened! That manifold is a 180-degree design; meaning that the planes on each side of the manifold are routed to feed only 4 cylinders each.