At one point my car was hit in the front passenger side causing the front of the passenger rail to be pushed in 3/8". I straightened it out, and I am now seeing that my passenger side frame rail is basically level while the drivers side tilts forward. Both rails are level to each other just in front of the firewall and are basically level front to back.
But at the radiator support the drivers side is 1/2" lower than the passenger side. I read a thread that mention that when the rocker panels are level the frame rails should tilt forward slightly. Does anyone have any information on this?
I will have the frame pulled straight but need to know which correct. Should it be basically level or tilt forward.
the measurements in the pic represent how much higher the drivers side is from the passenger side every 6"
![]()
Thanks
But at the radiator support the drivers side is 1/2" lower than the passenger side. I read a thread that mention that when the rocker panels are level the frame rails should tilt forward slightly. Does anyone have any information on this?
I will have the frame pulled straight but need to know which correct. Should it be basically level or tilt forward.
the measurements in the pic represent how much higher the drivers side is from the passenger side every 6"
Thanks
