No, but it sounds pretty slick. A couple things I've gotten recently that I really like is the bench grinder that Harbor Freight had on sale a couple weeks ago. It has a light that can on it that can twist all around and point in any direction. The other thing is a halogen light that sits on the floor ... excellent for working underneath the car! Be careful of the heat from Halogen lights, though ... last weekend working on my daughter's car, I didn't realize that my air hose was too close to the light until it melted through and the air started blowing out of the hose ... scared the begeesus out of me, because I thought a tire had somehow sprung a leak while it was up on jackstands! *LOL*

 

I don't think 50W bulbs are going to be bright enough for a workbench.

You can get a dual fluoroescent fixture at Home Depot for $10-15. Hang a few of these and you'll have plenty of light.

 

Beechkid! How are you? Been awhile.

Chris
Santa Monica

 

i personally find spot type lights too glaring. i used 4 ft 2-bulb (cold ambient outpput type) on both sides of car, with one over bench and a bench moveable for close work. also use 300 W Halogen for work in engine compartment and under car. MHO.