What starter did you use? Not the brand, the type? PMGR?

 

Uh idk, its one from autozone

 

Can you get a feel from where the noise is located? Is it back by the starter or possibly up front by the water pump or alternator?

 

It definitely isnt where the belt runs from

 

smack the starter and see if it quits... sounds like it might be stuck out and still engaged. Or there's a guy behind you running a leaf blower.....

 

Hard to tell from that short video, but it almost seemed like the sound didn't change in proportion to the RPM. In fact, it sounded like it stopped momentarily under "acceleration". Seems an engaged starter would have increased in noise with the RPM....? Also, if you are running the same flywheel, bellhousing and starter as in the "supposed to sound like" video, that would seem to eliminate those sources. Have you tried taking off the front accessory belts and running it?

 

Yea i took the belt of and ran it and it still makes the same sound.

 

I'd get under the car where the starter can be seen and touched and have someone start the engine.

 

sounds like your starter is stuck, as the other have said bang it with a hammer, if issue persists, replace with another another one, I would also inspect the flywheel for any damage.

or if you want to upgrade, get a mini-torq starter and a heat shield wrap, I've had mine for years and never gave me an issue.

 

Yea i just ended up ordering a new starter thats a mini starter, Ill update you guys

 

Or just take out the starter and take a look.